User's Manual

Librestream Onsight 1000/2000/2500 User Manual Audio/Video (AV) Functions

Î To end still image viewing:

1. Tap the Image Displayed icon

2. The Still Image Details screen will appear.

3. Tap End Still Image Display to clear the image from the Viewfinder. At this point you can also clear the

Image Displayed icon by checking off the Clear still image quick access icon checkbox.

Another way to clear the image from the Viewfinder is to briefly press the

Capture button instead of tapping the Image Displayed icon.

4. The message “Image display ended” appears and the image is cleared from the Viewfinder.

5. If the Image Displayed icon was not cleared in step 3 then you can view the image again by tapping the

Start Image Display icon

5.8.2 Sharing a Live Image

The On

sight device and Onsight Expert can collaborate by sharing images with each other while in a call, whether

video streaming is on or off.

Î To capture and share an image:

1. Connect to Onsight Expert.

2. Press the Capture button on the top of the Onsight device (the Capture button behaves like the shutter

button on a digital camera).

Note that if there are telestration lines, these are captured as part of the image.

3. The captured image is displayed briefly on the Viewfinder and then cleared. Any telestration will remain.

4. To view the image taken, tap on the Start Image Share icon

5. The message “Image sharing started” appears and the image is displayed on the Viewfinder and all

connected Onsight Expert Image Viewers.

If streaming and the Configuration > General > Media option “While sharing

an image, the video: Stops” is set then when a capture occurs, the streaming

video is turned off in the Viewfinder and the Onsight Expert Call window. Two

messages appear: “Preparing to share the image” and “Stopping the

stream”. Streaming video will return once the Capture button is pressed or

you tap on the Image Shared icon

to end image sharing. For more

information on the video options in the Media menu, see paragraph 6.5,

Configuration, on page 59.