User's Manual

Librestream Onsight 1000/2000/2500 User Manual Menus
59
Î To end still image display:
1. If Preview was selected to view the image, tap the image to close the image.
2. If Open was selected to view the image, press the Capture button or tap the Image Displayed icon
.
3. If the Capture button was used to end the still image display then the image is cleared from the Viewfinder,
but if the Image Displayed icon was selected to end the still image display, then the Still Image Details
screen appears.
4. Tap End Still Image Display.
5. The image is cleared from the Viewfinder.
6.4.4 Sharing an Image with Onsight Expert
See paragrap
h 5.8.3, Sharing a Saved Image, on page 49.
6.5 Configuration
Î To check or update Onsight device configuration options:
1. Starting from the default Viewfinder display, press the Display button
three times to display the Main
Menu.
2. From the Main Menu, tap the Configuration menu to display the configuration options.
3. From here, follow on-screen instructions to adjust the configuration options as necessary.
The table below is provided as an overview. Please see the System Administration Manual for detailed
information on Onsight device configuration.
Your Onsight system administrator may have configured company specific
default settings and access rights.
Screen Configuration Options Overview
General
Adjust the standby timeout (amount of time before the Onsight
device will switch from On to Standby, if it is idle).
Specify the location of saved images and video recordings, and
video options while sharing an image.
Display
Adjust the brightness of the Viewfinder backlight or recalibrate
the touch panel.
Change telestration colors.
Video
Adjust the video settings of the camera and select the video
source (internal camera or external via S-Video connector).
Provides option to display the time and date in video.