User's Manual

Librestream Onsight 1000/2000/2500 User Manual Maintaining the Onsight Device

7 Maintaining the Onsight Device

Follow these guidelines to ensure the Onsight device remains in good working order:

7.1 General Recommendations

x Limit exposure to dust, rain or moisture.

x Protect the Onsight device from temperature extremes (e.g., do not leave it on an automobile dashboard or

on top of a heat source).

x Observe the rated operating and storage environmental specifications.

x The Onsight device is a precision instrument and must be protected from drop and vibration. Always use the

provided wrist lanyard or a neck strap to prevent accidental drop.

x Operate the Onsight device in a well ventilated area to prevent overheating. Do not operate the Onsight

device in a closed environment where it can overheat (e.g. a sealed plastic bag).

x Always keep the I/O connector protected using the I/O Cover or an I/O Sled (Onsight 2000/2500).

7.2 Inspection/Maintenance/Cleaning

x Inspect the camera and connectors for damage and/or debris/moisture before each use.

x Wipe off any debris/moisture with a clean lint-free cloth and a 50/50 mixture of isopropyl alcohol and distilled

water, except for the Display/Touch Screen and interface connectors. Dry off remaining moisture with a fresh

lint-free cloth.

x The cleaning requirement for the Display/Touch Screen is in paragraph 7.3 below.

Do not submerse or pour any liquid onto the product.

7.3 Display/Touch Screen

x LCD displays deteriorate when exposed to ultraviolet rays. Do not leave the Onsight device in direct sunlight

or strong ultraviolet rays for extended periods of time.

x If you store the Onsight device above or below the rated storage temperature, it may cause permanent

damage to the display.

x Extended contact with water drops or finger grease may cause discoloration or spots.

x Protect the screen from scratches. Use the supplied stylus or plastic-tipped pens designed for use on a touch

screen. Never use a sharp object on the touch screen.

x Tap the screen lightly. Do not press hard or strike the screen.

x Clean the screen with a soft cloth moistened with distilled water. Do not use commercial or household

cleaners as they may damage the screen.

x Consider using a replaceable screen protector to help protect against scratches.

7.4 Optics

x If you will be using the Onsight device in a dusty or dirty environment, it is recommended that the lens be

protected with a screw-on lens filter such as a standard 30mm skylight filter.

x Clean the lens with optical lens cleaning cloth and cleaning solution. Do not use general purpose tissue.

7.5 Ergonomic Recommendations

Important: Follow the recommendations below to minimize risk of ergonomic injury.

x Follow the recommendations of your Health and Safety Officer regarding your company’s safety policies and

procedures.

x Whenever possible, reduce or eliminate repetitive motion.

x Maintain a natural position while operating the equipment.