Safety Notes

15 US-EN
Assembly
Note: You will need a screwdriver and a drill to assemble the product.
Note: Only use the screws and dowels supplied for the assembly of
the product.
Mount the receiver (see Fig. D).
Mount the transmitter (see Fig. E).
Preparing for use
For first time use, please remove the protective film from the name
plate of the transmitter and insert your name plate into the recess
on the transmitter.
Replace the protective film on the transmitter.
Inserting / replacing the batteries
Insert the batteries to provide power to the product before preparing
it for use.
Use the indicated battery types only. Failure to observe this advice
may result in product damage.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
320257_silv_Design-Funktuerklingel_content_US.indd 15 01.03.19 12:13