Operating Instructions
AFT 77 A1
US - EN
│
15 ■
Displays in basic mode
After the temperature station has received the
signal from the outdoor sensor and the WWVB
signal, the device enters basic mode.
In basic mode, the temperature station displays
the following information:
The time panel1
The time is shown
in 12-hour format
by default. In the
12-hour format,
the abbreviation
(Latin for "post meridiem" = afternoon) is
shown in front of the time between 12 noon
and 11.59 at night. The abbreviation
(Latin for "ante meridiem" = morning) is shown
in front of the time between 12 midnight and
11.59 in the morning. During summer,
(daylight saving time) is displayed. This display
is only shown if the WWVB signal is being
received.
If you live in an area that does not recognize
daylight saving time (i.e. parts of Arizona and
Indiana), you must turn off this function (see
Basic settings section).
IB_320042_AFT77A1_Funk-Temperaturstation_LB9.indb 15 08.03.19 09:30