Operating Instructions

AFT 77 A1
US - EN
│
23 ■
Displaying the maximum/
minimum temperature
Once the power supply and the connection
to the outdoor sensor have been established,
the maximum and minimum temperatures are
automatically recorded and saved by the tem-
perature station.
♦ In basic mode, press the
button8
once. The symbol is shown on both
temperature panels, and the highest mea-
sured temperature for indoors and outdoors
is displayed.
♦ Press the
button8 twice: the
symbol is shown and the lowest measured
temperature for indoors and outdoors is
displayed.
♦ Press the
button8 again to show the
current indoor and outdoor temperatures.
♦ Press and hold the
button8 for ap-
proximately 3 seconds while the maximum
or minimum value is being displayed to
delete the saved values.
Changing the temperature unit
On delivery, the temperature unit is preset to
degrees Fahrenheit ( ).
♦ In basic mode, press the
button9
to switch between the temperature units
(
or ).
IB_320042_AFT77A1_Funk-Temperaturstation_LB9.indb 23 08.03.19 09:30