Operating Instructions
AFT 77 B2
■ 12
│
US - EN
Operating the outdoor sensor
♦ Open the battery compartmentg on the back of the device by
sliding the battery compartment coverh in the direction of the ar-
row.
♦ Insert two type AAA batteries as indicated in the battery compart-
mentg.
♦ Close the battery compartmentg again. The indicator LEDa lights
up briefly and the current temperature is shown on the displayp.
Afterwards, the indicator LEDa lights up once per minute to
indicate that transmission is in progress.
Operating the temperature station
♦ Open the battery compartmentu on the back of the device by
removing the battery compartment coveri.
♦ Insert two type AAA batteries as indicated in the battery
compartmentu.
♦ Close the battery compartmentu again.
Once the power supply has been established, the display4 will
light up and go through a brief check of the display elements.
The temperature station will now attempt to connect to the outdoor
sensor. The reception icon
flashes on the outdoor temperature
panel r.
Once the temperature station has successfully connected to the outdoor
sensor, the reception icon
turns off and the outdoor temperature is
shown.
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 12_
345564_AFT77B2_Funk-Temperaturstation_LB9.indb 12
10.09.20 15:34
10.09.20 15:
3