Users Manual

GFGT 433 B1
US-EN - 23
8.5 Timer function
If you are not happy with the level of cooking achieved, you can
use the timer function to continue cooking the food for a little longer.
You do not have to leave the temperature sensor (30; 31) in the
meat for this. The procedure is as follows:
• Press the “MODE” button (5) until “TIMER” is shown on top of
the LCD display (2).
• Select the time you want by pressing the “MIN / +” (3) and
“SEC / -” (7) buttons. You can also hold the buttons down to
make the numbers move faster.
• Press the “TASTE / START” button (4) to start the countdown.
The time on the LCD display (2) now counts backwards and
you can see the time remaining at any time.
• You can use the “MEAT / STOP” button (9) to pause the
countdown, for example to check or turn the food. You can
then resume the countdown by pressing the “TASTE / START“
button (4).
• When the time is up, the LCD display (2) begins to flash red
and a beep sounds with each flash.
• Press the “MEAT / STOP” button (9) to stop the beeping.
Otherwise, the beeping stops automatically after about 2
minutes.