Safety Notes

25 US-EN

Wall-mounting the temperature station and / or the

outdoor sensor:

Note: This step requires an electric drill and a crosshead

screwdriver.

DANGER TO LIFE, RISK OF INJURY AN

PROPERTY DAMAGE! Carefully read the instructions for use

and safety notes for your drill.

DANGER TO LIFE! Be careful that you do

not hit electrical, gas or water lines when drilling into the wall. If

necessary, check the wall with a wall scanner before drilling.

Temperature station

Mark the location of the hole (D 0.24 in (D 6 mm)) on the w

all.

Note: Use the included drilling template intended for marking

the drill holes.

Drill the hole with an electric drill.

Push the wall anchor

into the drilled hole.

Using a crosshead screwdriver, screw the screw

into the

wall anchor.

317485_1904_aur_Funk-Temperaturstation_content_US.indd 25 27.09.19 14:02