User's Manual

15 US-EN
If you come into range of the paired device with the headphones
switched on, a Bluetooth
®
connection will automatically be
established.
You may need to approve the connection on the communication
device. Please refer to the instructions for use of the communication
device on this topic!
If you leave the range of your communication device with your
headphones, the LED will flash red every 2 seconds. If the connec-
tion is not restored within 5 minutes, the headphones will switch off.
The headphones may be manually switched off by holding the
button for 3 seconds until 4 beep sounds and the LED goes ou t.
Connecting the headphones to
a second Bluetooth
®
device
The headphones may be connected to two Bluetooth
®
communication
devices at the same time. If the headphones are already connected to
a device, follow the steps below to connect to the second device:
Activate multipoint mode by briefly pressing the button
8
in
pairing mode until four beeps sound.
Now connect to the second device; please note the above
chapter “Using the headphones“.
To deactivate multipoint mode: disable the Bluetooth
®
connection
on the communication device you wish to remove from multipoint
link. If necessary for your purposes, then extend the functions of
the Bluetooth
®
transmission of the communication device still
connected.
285814_silv_Bluetooth-Kopfhoerer_content_US.indd 15 13.03.17 13:03