3.1.2 Adjusting the Onboard LCD’s Contrast
The onboard LCD is factory-set to be easily viewed in lighting conditions found in most work places.
The contrast can be changed. To change the contrast:
1. Press any key to activate the LCD.
2. Press either the Right or Left arrow key to highlight the contrast icon, a circle half dark and half
3. Press the Select key.
4. Use the Right or Left arrow key to highlight the Up or Down contrast icon (each is an arrow). Use
the pattern to determine when the contrast is acceptable.
5. Press Select until the screen’s contrast is satisfactory
Figure 17 Adjust LCD contrast
The same steps apply to the RPC BDM.