Owners manual

Operation
Emerson
®
MPH2
™
22
3.1.3 Adjusting the Onboard LCD’s Orientation
The onboard LCD may be flipped for viewing ease. To flip the screen:
1. Press any key to activate the LCD.
2. Press either the Right or Left arrow key to highlight the information icon (
i).
3. Press the Select key.
4. Use the Right or Left arrow key to highlight the orientation icon .
5. Press Select to the flip the screen’s orientation.
Figure 18 Flip LCD
3.1.4 Obtain MPH2 System Information
1. Use the Left or Right arrow key to move the cursor to the information icon (the letter i) in the
lower right corner.
2. Press the Select key.
The onboard LCD shows information about the MPH2: model number, serial number, firmware
version, power rating and number of outlets. See Figure 19. After 5 minutes of no activity (no key
pressed), the onboard LCD returns to the main screen.
Figure 19 MPH2 rack PDU information screen
NOTE
The same steps apply to the RPC BDM.
Model: MPHM3141
S/N: 4FEB030033 MPHM3
FW Ver: 0.4.1.2
Ratings: 1P3W 120V 16A
Receptacles: 16
Model: MPHM3141
S/N: 4FEB030033 MPHM3
FW Ver: 0.4.1.2
Ratings: 1P3W 120V 16A
Receptacles: 16