Owners manual

Important Safety Instructions
Emerson
®
MPH2
2
EUROPEAN UNION
Notice to European Union Customers: Disposal of Old Appliances
This product uses components that are dangerous for the environment, such as
electronic cards and other electronic components. Any component that is
removed must be taken to specialized collection and disposal centers. If this
unit must be dismantled, this must be done by a specialized center for
collection and disposal of electric and electronics appliances or other
dangerous substances. This product has been supplied from an
environmentally aware manufacturer that complies with the Waste Electrical
and Electronic Equipment (WEEE) Directive 2002/96/EC. The “crossed-out
wheelie bin” symbol at right is placed on this product to encourage you to
recycle wherever possible.
Please be environmentally responsible and recycle this product through your
recycling facility at its end of life. Do not dispose of this product as unsorted municipal waste. Follow
local municipal waste ordinances for proper disposal provisions to reduce the environmental impact of
waste electrical and electronic equipment (WEEE).
For information regarding the scrapping of this equipment, go to
http://www.eu.emersonnetworkpower.com
(“Products session” or “Contact us” session) or call Emerson’s worldwide technical support at:
00 80011554499 (toll free number)
+39 0298250222 (toll number based in Italy)
ROHS Compliance
The MPH2 rack PDU modules comply with the Restriction of Hazardous Substances directive
(ROHS), prohibiting use of six hazardous materials manufacturing of electronics, including lead-free
solder.
FCC Compliance
This unit complies with the limits for a Class A device pursuant to Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation.
!
CAUTION
All configuration steps must be completed before attempting to start equipment connected to
the MPH2 rack PDU.
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference that
the user must correct, including the expense of all corrective modifications.