Network Device Product Specification Sheet

Liebert

SiteTPI-1

™

Product Specification/Installation Sheet

The Liebert SiteTPI-1 is an ARCnet-ready device intended to

interface specifically with a Liebert SiteScan

Web system.

It is a 32-bit microprocessor-based device designed to monitor

third-party equipment via an EIA-485/232 interface.

Logically, the device sits on the ARCnet network, providing

the interface to Liebert SiteScan Web. The Liebert SiteTPI-1

converts proprietary equipment data into open protocol data,

enabling a single piece of equipment to reside on a BACnet or

Modbus network where it can be monitored or controlled by a

Critical Management System.

Screw terminal blocks are provided to terminate power,

communication and input signal wiring.

Module Dimensions and Layout

2.05"

(52.07mm)

4.1" (104.14mm)

4.8"

(121.92mm)

5.2"

(132.08mm)

0.2" (5.08mm)

0.2"

(5.08mm)

LED Indicators

Addressing

Rotary

Switches

Port 2

PAGE 1
Liebert® SiteTPI-1™ Product Specification/Installation Sheet The Liebert SiteTPI-1 is an ARCnet-ready device intended to interface specifically with a Liebert SiteScan® Web system. It is a 32-bit microprocessor-based device designed to monitor third-party equipment via an EIA-485/232 interface. Logically, the device sits on the ARCnet network, providing the interface to Liebert SiteScan Web.
PAGE 2
Power Wiring CAUTION ! The Liebert SiteTPI-1 is a Class 2 device (less than 30VAC, 100VA maximum). Take appropriate isolation measures when mounting the Liebert SiteTPI-1 in a control panel where non-Class 2 devices (for example, 120VAC) or wiring are present. Mounting Screw the Liebert SiteTPI-1 into an enclosed panel using the mounting holes provided on the cover plate. Be sure to leave about 2" (50mm) on each side for wiring. Specifications Power Dimensions, W x D x H: in.