Operating instructions No-frost combined refrigerator-freezer Page 14 GB 7082 499-00 CBNes 62 211
Disposal notes The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil. • Disable the appliance.
GB Description of appliance and equipment 1 Operating and control elements 2 Adjustable door racks 3 Adjustable storage shelves 4 Bottle rack 5 Type plate (behind the vegetable drawer on the left-hand side) 6 BioFresh drawers 7 Water filter 8 Upper freezer drawer 9 Lower freezer drawer bl IceMaker (in the interior of the upper freezer drawer) bm Ventilation grille. In this area, the exchange of air for the refrigeration unit takes place. Never cover this grille or otherwise obstruct the air flow.
Water filter Before switching on the appliance, install the water filter provided in the interior rear wall of the refrigerator compartment. This ensures good ice cube quality and keeps the water circuit free of solids such as sand. Installing the water filter 1. Remove the cover of the filter socket. Water filter location Replace the filter when the waterdrop symbol appears in the temperature display. 2. Insert the filter and turn it 90° clockwise. Filters can be obtained from your dealer.
Switching the appliance on and off You are advised to clean the appliance before switching it on for the first time (see "Cleaning"). Do not load with frozen food until the temperature shows at least -18°C. The refrigerator and freezer compartments can be operated separately. Switching on: Touch the On/Off icons (on left for refrigerator, on right for freezer) so that the temperature displays light up or flash. Switching off: Keep the On/Off icons pressed for approx. 3 seconds.
Setup mode = Confirm water filter change The following functions can be activated in setup mode: After the water filter has been changed, the drop symbol on the display must be reset. = Child lock Resetting the drop symbol = Confirm water filter change • Activate setup mode by touching the SuperFrost icon for 5 seconds. = Ice maker vacation state = Water quantity for ice cube tray • Touch the freezer compartment Down icon until appears in the display.
= Set BioFresh temperature The temperature in the BioFresh drawers may be changed. Setting the BioFresh temperature • Activate setup mode by touching the SuperFrost icon for 5 seconds. • Touch the freezer compartment Down icon until the display. appears in • Touch the SuperFrost icon. - The display reads For values b4 - b1, the temperature in the drawers can drop to below 0°C. Food may freeze. • Touch the SuperFrost icon at the desired value.
Interior light The interior light is located at the left, right and top in the refrigerator compartment and above each drawer in the freezer compartment. It comes on if one of the doors or a freezer drawer is opened. Removing the shelves Caution - class 1M laser radiation. When cover is removed, do not look directly at light through optical instruments. Severe eye injury can occur. 2. Move the shelf down and stop just over the vegetable drawer.
Arranging food GB BioFresh compartment The BioFresh compartment enables you to keep food for up to 3 times longer than in normal refrigerators. The constant temperature of just above 0°C and the adjustable humidity provide the ideal storage conditions for different types of food.
Freezer compartment description Both drawers can be used for freezing of food or storage of frozen food. The ice cube bin in the upper drawer is intended for ice cubes only. If you need the whole upper drawer for freezing or storage, the ice cube bin can be removed. Important: The ice maker will not eject the ice cubes of its tray if the bin has been removed. Ice cube bin Ice maker Space for freezing and storage Notes on freezing and storage • Always store identical food items together.
GB Bleeding the ice maker To ensure that the ice maker works properly, the water supply line must be bled. • Touch the IceMaker icon comes on. • Open the top freezer drawer. so that the IceMaker LED Ice maker vacation state In case of longer vacations, the ice cube tray should be emptied. By setting the ice maker into the vacation state, the tray will rotate down and no water remains in the tray. • Press the ON/OFF button on the ice maker housing for approx. 3 seconds.
Defrosting Cleaning the dust filter The refrigerator compartment defrosts automatically.The water that forms on the rear wall drains into a reservoir at the back of the appliance and evaporates automatically through the compressor heat. 2. Pull the bottom freezer drawer right out. Refrigerator compartment 1. Disconnect the appliance from the mains. 3. Unscrew the ventilation grille. Freezer compartment The NoFrost system automatically defrosts the appliance.
Malfunctions GB Your appliance is designed and manufactured for a lengthy, reliable operating life with no malfunctions. If a malfunction nonetheless occurs during operation, check whether it is due to an operating error. Please note that even during the warranty period the resultant servicing costs in this case will have to be borne by the owner.