Operation Manual

5.8.3 SuperCool
With SuperCool you switch to the highest cooling
performance to reach lower cooling temperatures.
Use SuperCool, to rapidly cool large amounts of
food.
The SuperCool function uses slightly more energy.
Cooling with SuperCool
u
Activate the MAIN MENU.
u
Activate the REFRIGERATOR -> SUPERCOOL -> INFO
menu items one after the other.
w
The info text in the display describes the purpose for which
SuperCool is used.
u
Press the OK button Fig. 3 (3) until ON and INFO are indi-
cated in the display.
u
Select ON.
u
Press OK button Fig. 3 (3) .
w
SuperCool is activated.
w
SuperCool is automatically deactivated after 6 to 12
To deactivate SuperCool ahead of time
u
Activate the MAIN MENU.
u
Activate the REFRIGERATOR -> SUPERCOOL -> OFF
menu items one after the other.
w
SuperCool is deactivated.
5.8.4 Holiday mode
The holiday mode saves energy and prevents odour
from occurring when the door of the refrigerator
compartment stays closed for a lengthy period.
The freezer compartment remains in operation in the
holiday mode.
Activating the holiday mode
u
Remove all the food.
u
Activate the MAIN MENU.
u
Activate the REFRIGERATOR -> HOLIDAY-> INFO menu
items one after the other.
w
The info text in the display describes the purpose for which
holiday mode is used.
u
Press the OK button Fig. 3 (3) until ON and INFO are indi-
cated in the display.
u
Set the cursor to ON.
u
Press OK button Fig. 3 (3) .
w
The holiday mode is activated. HOLIDAY is indicated in the
display at the top instead of refrigerator compartment
temperature.
Deactivating the holiday mode
u
Activate the MAIN MENU.
u
Activate the REFRIGERATOR -> HOLIDAY -> OFF menu
items one after the other.
w
The holiday mode is deactivated.
5.8.5 Shelves
Moving or removing shelves
The shelves have stops preventing them from being uninten-
tionally pulled out.
Fig. 27
u
Lift the shelf slightly and pull forward a little.
u
Adjust the height of the shelf. To do so, push the cut-outs
along the supports.
u
In order to remove the shelf fully, place it at a slant and pull
out towards the front.
u
Re-insert shelves at the required height. The stops must
face downwards and lie behind the front shelves.
Dismantling shelves
u
The shelves can be disman-
tled for cleaning.
5.8.6 Using the sectioned shelf
Fig. 28
u
The glass plate (1) with pull-out stops must be at the front so
that the stops (3) face downwards.
5.8.7 Door racks
Moving the storage rack
u
Remove storage rack according to
illustration.
The boxes can be removed
and placed on the table as a
single unit.
Three small boxes are available through the customer service
as optional equipment instead of one wide and one small box.
Either one or both the boxes can be used. If particularly tall
bottles are to be stored, hang only a single box above the bottle
rack.
u
Re-positioning the boxes:
Lift them for removal and re-
position them as required.
Control
16 * Depending on model and options