Operating instructions

Instructions for installation and

modication

* depending on model and options

Insertion into row of kitchen units

Fig. U. The appliance can be integrated into the kitchen units.

To adapt the appliance to the height of the row of kitchen

units, a suitable top cupboard can be tted above the appli-

ance

For ventilation and air extraction, an exhaust air shaft at least

50 mm deep must be provided on the rear of the top cupboard

over the entire width of the cupboard. The ventilation cross-

section below the ceiling of the room should be at least 300

. Generally, the bigger the cross section, the more eco-

nomically the appliance operates.

W When integrating with standard kitchen units (depth

max. 580 mm) and decor panels of up to max. 2 mm thick,

the appliance can be installed directly next to the kitchen

unit. The door of the appliance protrudes beyond the front

of the kitchen unit 34 mm at the side and 51 mm in the cen-

tre of the appliance. This allows it to be opened and closed

easily.

W When installing the appliance next to a wall

4, a distance

on the hinge side of min. 36 mm is required between the

appliance and the wall (handle projection with door open).

1 top cupboard 3 side of kitchen unit

2 refrigerator freezer 4 wall

Note on tting decor panel*

(with white appliances of height H = 1982 mm)

With decor panel and decor frame, you can adapt the appli-

ance to the front of the kitchen units or contrast with them.

The decor panels can be obtained from your kitchen furniture

supplier. The decor frames can be retrotted and are available

through your specialist dealer.

If you wish to t the decor panel yourself, you require a drill or

cordless screwdriver to pre-drill the retaining holes. The door

handles are to be replaced by the rigid handles included in the

decor frame retrot set.

For further assembly instructions and dimensions, please see

the assembly instructions included in the retrot set.

________________________________________________

The manufacturer is continually working on the continous

improvement of all types and models. We therefore hope for

your understanding that we reserve the right to alter design,

equipment and technology without notice.