Installation instructions

14
r everSIng D oor H IngeS
43. Move soft stop mechanism
hinge to the fastener and insert
pin.
44. Remove red safety bracket.
45. Pivot door cover to the left and
click into place on the door.
43.
44.
45.
41. Insert middle hinge pin.
42. Slide door cover over soft stop
mechanism hinge.
41.
42.
50. Feed in the cable of the hinge
at the opposite side and insert
hinge.
51. Plug in the connector. Place the
cable in the guide.
50.
51.
47. Disconnect the connector.
48. Using a screwdriver, push out
the hinge from underneath and
remove it from the door complete
with the cable.
49. Using a screwdriver, push out the
plug from underneath and transfer
it to the opposite side.
46. Click cover into place.
46.
47.
48.
49.