Spec Sheet

Unit Dimensions
Cabinet Opening Dimensions
Ventilation Requirements
The appliance can be used freestanding or semi built-in. If semi built-in,
consider the cabinet opening dimensions.
The power cord comes out of the appliance top. The location of the electrical
outlet can be within a radius of 90 inch from the appliance top center.
A. 79-9/16" (2020 mm)
B. 29-3/8" (747 mm)
C. 24-13/16" (630 mm)
D. 52-3/8" (1330 mm)
E. 31-1/8" (791 mm)
Do not restrict the air fl ow. The opening can either be directly over the appliance , above the cabinet and
below the ceiling t .
The cabinet height as specifi ed at 80" (2032 mm) will create a 1-5/16" (33 mm) gap above the appliance
cient operation.
Be sure to consider the possibility of having to raise some of the leveling legs in order to level the appliance
yourself some room for adjustment.
IMPORTANT
The section between the freezer door and the fl oor must not be covered.
The refrigerator is designed to allow proper air fl ow when the appliance is installed up against the wall.
A minimum space of 1 1/2" is required behind the cabinet when venting above an upper cabinet which
is installed fl ush to the top of the appliance.
B - Side view
Cabinet
Refrigerator
30"
Diagrams
Liebherr CBS 1661
Freestanding/Semi Built-in
The water line lead out
position can be within
the shaded area.
30" (76.2 mm)

Summary of content (2 pages)