Operating instructions No-frost combined refrigerator-freezer Page 12 GB 7083 267-00 CN 56
Disposal notes The appliance contains reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. When disposing of the appliance, ensure that the refrigerant circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil. • Disable the appliance.
Safety instructions and warnings • To prevent injury or damage to the unit, the appliance should be unpacked and set up by two people. • In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains. • To guarantee safe operation, ensure that the appliance is set up and connected as described in these operating instructions. • Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse.
Setting up • Do not place the appliance in areas of direct sunlight or next to a cooker, radiator or similar object. • The floor on which the appliance stands should be horizontal and level. To compensate for any unevenness, adjust the height of the feet with the open-ended spanner supplied. • Do not cover ventilation openings or grille. • Do not place heat-emitting appliances, e.g. microwave oven, toaster, etc., on top of the appliance.
Switching the appliance on and off Brightness of the temperature display GB Clean the interior of the appliance before switching it on for the first time (see "Cleaning"). You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed. To switch on Press the On/Off button 1 or 6 so that the temperature displays light up. Adjusting the brightness To switch the refrigerator compartment off Press the On/Off button 1 for approx.
Audible warning signal Audible door alarm If an appliance door is left open for more than 60 seconds, the audible warning signal will sound. Press the audible warning on/off button 8 to cancel the alarm. The alarm switches back to standby when the door is shut. Audible/visual temperature alarm If the temperature in the freezer compartment rises too high, the audible warning signal will sound and the alarm symbol 2 and the temperature display will flash.
Interior light (Refrigerator compartment) The interior light will always switch on when the appliance door is opened. The light intensity of the LED light corresponds to laser class 1/1M. Important The light cover may only be removed by customer service staff. If the cover is removed, do not look directly at the light through optical lenses from close distance. This can damage your eyes.
Freezing Defrosting The maximum amount of food (in kg) which can be frozen in 24 hours is shown on the type plate ("Freezing capacity"). Refrigerator compartment The position of the type plate is shown in the section entitled Description of the appliance. Freezer compartment SuperFrost By activating the SuperFrost function the temperature in the freezer compartment will drop to the lowest attainable value. Thus food can be rapidly frozen to the core and the quality is preserved.
Malfunctions GB Installing appliance in a row of kitchen units You may be able to rectify the following faults by checking the possible causes yourself: To adapt the height of the appliance to the surrounding furniture a top unit 1 can be added.
Changing over door hinges Door hinges should only be changed by a trained expert. Changing the door hinges must be done by two people. Caution! Before changing over door hinges, disconnect the appliance from the mains. 1. Open top door. 2. To remove the cover on the handle side: disengage the cover on the right using a flat-blade screwdriver and push it outwards. 3. To remove the cover on the hinge side: disengage the cover on the left using a flatblade screwdriver and push it outwards. 12.
GB 32 23 23. Transfer cover to the opposite side. 32. Using a screwdriver, push out the plug from underneath and transfer it to the opposite side. 24. Transfer cover plate to the opposite side. 33. Feed in the cable of the hinge at the opposite side and insert hinge. 24 25. Screw hinge bracket into place. 33 34. Plug in the plug. Place the cable in the guide. 25 35. Engage the cover on the door. 34 35 26. Tilt appliance slightly backwards, insert pin and attach using the adjustable foot.