Design Guide 2008 Freestanding / Semi Built In Models 30", 36" and 60"
Welcome Liebherr's engineering excellence in Germany provides the largest selection of freezers, refrigerators and wine refrigerators worldwide. Liebherr-appliances consistently specializes in the manufacturing of high quality freezers and refrigerators. With more than 300 basic models, we have the widest selection in the world. Liebherr appliances feature premium quality, numerous innovative product ideas and advanced design.
Introduction LIEBHERR WARRANTY PLAN FULL TWO YEAR WARRANTY - For two years from the date of original purchase, your Liebherr Warranty covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship. FULL FIVE YEAR WARRANTY - For five years from the date of original purchase, your Liebherr Warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system.
Contents General Remarks Safety Warnings I Electrical Requirements & Safety II IceMaker (if equipped) III Area Requirements IV Safety Regulations V Freestanding/Semi Built In Models 30", 36" and 60" Models: CS 16.., CS 2062, SBS 32S0 1 Unit Dimensions 3 Cabinet Opening Dimensions 5 Ventilation Requirements 7 Top Door Hinge Clearance CS 16..
General Remarks I. Safety Warnings PLEASE READ AND FOLLOW THESE INSTRUCTIONS This design guide contains Warning and Caution statements. This information is important for safe and efficient installation. This design guide is not replacing the use and care manual which contains important information on how to use Liebherr appliances. Always read and follow all Warning and Caution statements! States a hazard that may cause serious injury or death if precautions are not followed.
General Remarks II. Electrical Requirements & Safety III. IceMaker (if equipped) A 115 Volt, 60 Hz, 15 Amp (20 Amp for side-by-side installation) fused electrical supply is required. Connect undercounter wine cabinet to a 115 VAC, 10 amp (15 Amp for side-by-side installations) circuit that is controlled by a circuit breaker or fuse. We recommend using a dedicated circuit for these appliances to prevent electrical overload.
General Remarks IV. Area Requirements V. Safety Regulations Verify the following: • Floors can support refrigerator’s weight plus approximately 1200 pounds (544 kg) of food weight. Not all Liebherr products are designed for 1200 pounds (544 kg) of food. Some units are smaller and total weights may vary. The appliance complies with UL250 and CAN/CSA-C 22,2 No. 63 and is designed to cool, freeze, store food as well as make ice (if equipped). It is designed as a household appliance.
Freestanding/Semi Built In Models CS 1601, 1650 30", 36" and 60" Models: CS 16.., CS 2062, SBS 32S0 The unique design of Liebherr's freestanding models feature fully stainless steel doors, and even stainless steel side walls - a perfect combination of design and functionality. 30" Models CS 1601 Energy Star: Energy consumption p. a.: Energy Supply: Total capacity: Refrigerator: Freezer: Climate Rating: Door hinges: qualified 460 kWh 115V / 60Hz / 2.5A 15.5 cu ft (438 L) 11.3 cu ft (320 L) 4.
Freestanding/Semi Built In Models CS 2062, SBS 32S0 36" and 60" Models CS 2062 Energy Star: Energy consumption p. a.: Energy Supply: Total capacity: Refrigerator: Freezer: Ice cube capacity: Ice cube stock: Climate Rating: qualified 452 kWh 115V / 60Hz / 2.5A 19.5 cu ft (552 L) 13.5 cu ft (382 L) 6 cu ft (170 L) 3 pd./24h 6 pd.
Freestanding/Semi Built In Models CS 1601, CS 1650, CS 2062 Unit Dimensions - Freestanding Models Overall height can be increased on all CS 16 units by 5/8" (16 mm) by adjusting the roller base. CS 1601, CS 1650 A. B. C. D. E. F. G. 2-1/4" (57.5 mm) 81-11/32" (2066 mm) 29-1/2" (750 mm) 31-3/8" (797 mm) 23-1/4" (590 mm) 24-13/16" (630 mm) 51-25/32" (1315 mm) Overall height can be increased on CS 20 units by 1-1/2" (40 mm) by adjusting the roller base. CS 2062 A. B. C. D. E. G. H.
Freestanding/Semi Built In Models SBS 32S0 Overall height can be increased on SBS 32 units by 5/8" (16 mm) by adjusting the roller base. SBS 32S0 (CS 1601 & CS 1650) A. B. C. D. E. F. G. 2-1/4" (57.
Freestanding/Semi Built In Models CS 1601, CS 1650, SBS 32S0 Cabinet Opening Dimensions - 30" and 60" Models The appliance can be integrated into the kitchen units. To adapt the appliance to the height of the row of kitchen units, a suitable top cupboard can be fitted above the appliance. Unit Venting Electric outlet location DO NOT restrict the air flow. An air flow of at least 2" (50mm) must be provided.
Freestanding/Semi Built In Models CS 2062 Cabinet Opening Dimensions 36" Models The appliance can be used as freestanding or semi built-in. At semi built in please consider the cabinet opening dimensions. The requirements for water supply and electrical outlet are the same for both applications. IMPORTANT Do not install the shut-off valve behind the appliance. The position of the electrical outlet can be within the grey shaded areas or above the appliance. Water line opening A. B. C.
Freestanding/Semi Built In Models CS 1601, 1650 - SBS 32S0 Ventilation Requirements CS 1601, CS 1650, SBS 32S0 This type of cabinet must be carefully constructed using the correct dimensions and it must provide suitable ventilation to ensure proper appliance operation. Kitchen Cabinet Airflow 1. The following ventilation dimensions must be observed: There must be a ventilation space at least 31 in.² (200 cm²) at the airflow inlet (1) and at the airflow outlet (2).
Freestanding/Semi Built In Models CS 2062, Ventilation Requirements CS 2062 CS 20 appliances dont need any ventilation openings in the cabinet. The required airflow is directed through the toe kick area. It is important to use the provided cover grille for the ventilation opening. This opening must not be covered with a cabinet base.
Freestanding/Semi Built In Models CS 1601, 1650 - SBS 32S0 Top Door Hinge Clearance CS 16.. - SBS 32S0 When installing CS units into a row of cabinets or wall units; use these dimensions to achieve a custom look with the cabinetry while providing the necessary clearance for the top door hinge.
Freestanding/Semi Built In Models CS 2062, Top Door Hinge Clearance CS 2062 When installing CS 20 units into a row of cabinets or wall units; use these dimensions to achieve a custom look with the cabinetry while providing the necessary clearance for the top door hinge.
Freestanding/Semi Built In Models Door Swing Clearance CS 2062 Front of appliance housing Left side wall of appliance housing Top View Door closed ° or 45 do le 1 um ang m i g x Ma enin p o 11
Freestanding/Semi Built In Models 12
Design Guide 2008 Freestanding / Semi Built In Models 30", 36" and 60"
