Operating instructions

18
T roubleshooTing
Problem Possible Cause and Remedy
Appliance does not work,
display is off
- Is the appliance turned on properly?
- Is the power cord properly inserted in the outlet?
- Is the circuit breaker or fuse in operating condition?
The interior light does
not come on
- Is the refrigerator compartment turned on?
- Has the door been open for more than 15 minutes?
Loud running noise - Is the appliance standing firmly on the floor, or does the compressor
cause nearby items of furniture or objects to vibrate? If necessary, move
the appliance slightly, align by adjusting the adjustable feet, or adjust
bottles and containers.
Motor seems to
run too long
- Is the ambient temperature too hot? See Safety Regulations.
- Has the appliance been opened too often or left open too long?
- A large amount of food has been added.
- Unit is in SuperCool mode. Verify unit is in normal operation mode.
The temperature is
not cold enough
- Is the temperature setting correct? See Setting the Temperature.
- Has an excessive amount of fresh food been placed in the appliance?
- Does a separately installed thermometer show the correct reading?
- Is the ventilation system working properly?
- Is the appliance set up too close to a heat source?
Freezer temperature display
shows two dashes - -
The freezer temperature display will only show temperatures that are below freezing.
When initially starting the freezer it will not be below freezing. It will take three to five
hours (depending on ambient conditions) for freezing temperatures to be achieved
and thus displayed numerically. This may also occur after a power failure.
Ice maker cannot be turned
on
- Is the appliance connected to the electrical outlet?
Ice maker is not making any
ice
- Is the ice maker turned on?
- Is the water supply line open?
- Is the IceMaker drawer closed properly?
Customer Service
If none of the above possible causes apply, and you can not rectify the fault yourself,
contact the Liebherr Service Center. Indicate the type (1) of appliance, service num-
ber (2) and the appliance / serial number (3) as shown on the model plate.
The position of the model plate is shown in the section entitled Description of the
Appliance.
Your appliance is designed and manufactured for a long life and reliable operation.
If a problem occurs during operation, check whether it is due to an operating error.
Please note that even during the warranty period, you may be responsible for certain repair costs.