Spec Sheet

ManualsBrandsLiebherr ManualsDomestic AppliancesCS1360B

Unit Dimensions

Cabinet Opening Dimensions

Ventilation Requirements

Top Door Hinge Clearance

B - Side view

Cabinet

Refrigerator

A. 2-7/32" (56.5 mm)

B. 79-9/16" (2020 mm)

C. 23-5/8" (600 mm)

D. 25-3/16" (640 mm)

E. 24-3/16" (614 mm)

F. 24-13/16" (630 mm)

G. 46-1/2" (1180 mm)

(76 mm)

*The given cabinet opening height dimension includes space

for top air vent. If you choose to place the vent above the

cabinet or in a so t, you will need to adjust the height

dimensions accordingly. Please refer to Ventilation

Requirements.

When installing CS units into a row of cabinets or

wall units: Use these dimensions to achieve a custom

look with the cabinetry while providing the necessary

clearance for the top door hinge.

This type of cabinet must be carefully constructed using the correct dimensions and it must provide suitable

ventilation to ensure proper appliance operation.

Kitchen Cabinet Airﬂ ow

The following ventilation dimensions must be observed: There must be a ventilation space at least 31 in.²

(200 cm²) per appliance at the airﬂ ow inlet (1) and at the airﬂ ow outlet (2).

The top ventilation space can be directed in one of the following ways:

A) Directly over the appliance (2) with a gap between the ceiling of the unit and the cabinet.

B) Above the cabinet and below the ceiling (3).

C) Through a vent installed in a so t (4).

The refrigerator is designed to allow proper air ﬂ ow when the appliance is installed up against the wall.

A minimum space of 1 1/2" (38mm) is required behind any cabinet above the appliance if ventilating

above that cabinet.

The appliance can be integrated into the kitchen

units. To adapt the appliance to the height of the

row of kitchen units, a suitable top cupboard can

be ﬁ tted above the appliance.

Unit Venting

DO NOT restrict the air ﬂ ow. A cross-sectional

air ﬂ ow of at least 31" square (200cm ²) must be

provided. The opening can either be directly over

the appliance or behind of the cabinet on top of the

unit (see ventilation requirements).

The CS models can be installed in standard 24"

(609mm) deep cabinets. You will only have to make

sure that the door swing clearance is enough. It is

possible to push all CS models to the rear wall of the

cabinet without modiﬁ cation.

When installing the appliance next to a wall, a distance

on the hinge side of 1 13/32 inches (36 mm) minimum

is required between the appliance and the wall to allow

for the door handle projection when the door is open.

Minimum Cabinet Opening Dimensions:

A. 23-7/8" (606 mm)

B. 24" (609 mm)

C. 85-29/32" (2182 mm)

D. CS 13.. 80" (2032 mm)*

24"

Diagrams

Liebherr CS 1360B

Freestanding/Semi Built-in

Summary of content (2 pages)

PAGE 1
Diagrams 24" Unit Dimensions Ventilation Requirements A B - Side view B Cabinet Refrigerator C A. 2-7/32" (56.5 mm) This type of cabinet must be carefully constructed using the correct dimensions and it must provide suitable ventilation to ensure proper appliance operation. B. 79-9/16" (2020 mm) Kitchen Cabinet Airﬂow The following ventilation dimensions must be observed: There must be a ventilation space at least 31 in.
PAGE 2
Freestanding/Semi Built-in 24" The slim styling and urban design of the CS 1360B is the perfect choice for small spaces, galley kitchens, or apartment living. While being the most energy efficient unit in its class, the sleek 24” unit includes smart interior design features like a beverage rack, foldable glass shelf, and a stainless back wall which prevents ice build-up and dripping. Liebherr’s SmartSteel material on the door is scratch resistant and makes fingerprints virtually disappear.