Installation Instructions

9
Connection to the Water Supply
1. Move the appliance towards the final position and
leave enough space to work behind.
2. Remove the cover from the solenoid valve.
3. Connect the water line to the adapter in
the respective configuration, depending
on the type of water line used.
4. Bleed the air from the water line by opening
the water supply temporarily.
5. Screw the adapter onto the
solenoid valve.
6. Move the power supply line to the area of the electri-
cal outlet.
WARNING!
Do not connect to the electrical outlet
before the installation is completed and
the water line is connected to the solenoid
valve.
7. Push the appliance slowly to the back wall. Make
sure the water line does not interfere with the anti tip-
ping bracket(s).
8. Open the shut-off valve for the water supply and
check the entire water system for leaks.
I ce m aker
The figure shows the con-
figuration with a copper line
as an example.