DesignGuide freestanding semi built in 30,36, and 60 inch 28984 0
Freestanding/Semi Built In Models
Ventilation Requirements 30" and 60" Models
Therefrigeratorisdesignedtoallowproperairowwhen
the appliance is installed up against the wall.
A minimum space of 1 1/2" is required behind the cabinet
when venting above an upper cabinet which is installed
ushtothetopoftheappliance.
9
B - Side view
Cabinet
Refrigerator
Do not restrict the air flow. The opening can either
be directly over the appliance
1
, above the cabinet
and below the ceiling
2
or through a vent installed
in a soffit
3
.
The cabinet height as specified at 80” (2032 mm)
will create a 1-5/16” (33 mm) gap above the
appliance providing optimal air flow over the top of
the appliance for its efficient operation.
To have the same air flow for CS 1400 appliances,
the cabinet opening height must be 73-3/4"
minimum.
Be sure to consider the possibility of having to
raise some of the leveling legs in order to level the
appliance when installing. If you adjust the height
of the appliance - it will effectively reduce air flow.
Therefore leave yourself some room for adjustment.
IMPORTANT
The section between the freezer door and the floor
must not be covered.
1
2
3