Installation Guide

13
r everSIng D oor H IngeS
49. Suspend top door on hinge pin.
For this, the door must be open
at least 90°.
49.
50. Secure door with screws
and click cover into place.
51. Click cover into place.
52. Slide door cover over soft stop
mechanism hinge.
50.
51.
52.
53. Pull the right-hand side of the cover
approx. 1/4" (6 mm) towards you.
54. Move soft stop mechanism hinge to
the fastener and insert pin.
55. Remove red safety bracket.
56. Pivot door cover to the left and click
into place on the door.
57. Click cover into place.
58. Place the appliance in its final
position at the place of instal-
lation.
Extend the adjustable foot at
the bottom hinge bracket until
it rests on the floor and then
make a further 90° turn.
54.
53.
55.
56.
58.
57.
IMPORTANT
The door must now be held secure by another
person.