Specifications

ManualsBrandsLiebherr ManualsOtherCS1640BL

Unit Dimensions

Cabinet Opening Dimensions

Ventilation Requirements

IMPORTANT

Do not install the shut-

off valve for the water

supply behind the

appliance.

(CS 1660 only)

The water line lead out

position for CS 1660

models can be within

the shaded area.

CS 16..

H = 80" (2032 mm)

The appliance can be used freestanding or semi built-in. If semi built-in,

consider the cabinet opening dimensions.

The power cord comes out of the appliance top. The location of the electrical

outlet can be within a radius of 90 inch from the appliance top center.

A. 79-1/2" (2020 mm)

B. 29-3/8" (747 mm)

C. 24-13/16" (630 mm)

D. 52-3/8" (1330 mm)

E. 31-1/8" (791 mm)

Do not restrict the air ﬂ ow. The opening can either be directly over the appliance ➀, above the cabinet and

below the ceiling ➁ or through a vent installed in a so t ➂.

The cabinet height as speciﬁ ed at 80" (2032 mm) will create a 1-5/16" (33 mm) gap above the appliance

providing optimal air ﬂ ow over the top of the appliance for its e cient operation.

Be sure to consider the possibility of having to raise some of the leveling legs in order to level the appliance

when installing. If you adjust the height of the appliance - it will e ectively reduce air ﬂ ow. Therefore leave

yourself some room for adjustment.

IMPORTANT

The section between the freezer door and the ﬂ oor must not be covered.

The refrigerator is designed to allow proper air ﬂ ow when the appliance is installed up against the wall.

A minimum space of 1 1/2" is required behind the cabinet when venting above an upper cabinet which

is installed ﬂ ush to the top of the appliance.







B - Side view

Cabinet

Refrigerator

30"

Diagrams

Liebherr CS 1640B

Freestanding/Semi Built-in

Summary of content (2 pages)

PAGE 1
Diagrams 30" Unit Dimensions Ventilation Requirements B - Side view Cabinet Refrigerator Do not restrict the air ﬂow. The opening can either be directly over the appliance ➀, above the cabinet and below the ceiling ➁ or through a vent installed in a soffit ➂. The cabinet height as speciﬁed at 80" (2032 mm) will create a 1-5/16" (33 mm) gap above the appliance providing optimal air ﬂow over the top of the appliance for its efficient operation.
PAGE 2
Freestanding/Semi Built-in 30" The urban design of the CS 1640B is the perfect choice for apartment living. The CS 1640B includes smart interior design features like a beverage rack, foldable glass shelf, and a stainless back wall which prevents ice build-up and dripping. Liebherr’s SmartSteel material on the door is scratch resistant and makes fingerprints virtually disappear.