Installation Instructions

9
Icemaker
Figure 16
Figure 17
9. Open the shut-off valve
for the water supply and
check the entire water system
for leaks.
Connection to the Water Supply
1. Move the appliance
towards the final posi-
tion and leave enough
space to work behind.
2. Insert the water supply
line into its intended
opening at the back
of the appliance
(Figure 14).
3. Move the power sup-
ply line to the area of
the electrical outlet.
Figure 15
Anti tipping bracket
Compressor mounting
plate
Wall
Appliance
4. Push the appliance slowly to the back wall until the
compressor mounting plate makes contact with the
anti-tipping bracket (Figure 15).
WARNING!
Donotconnecttotheelectricaloutlet
before the installation is completed and
the water line is connected to the solenoid
valve.
8. Screw the adapter
onto the solenoid
valve (Figure 17).
5. Remove the cover from the solenoid valve
(Figure 16).
6. Connect the water line to the adapter in the respec-
tive configuration, depending on the type of water line
used. Figure 17 shows the configuration with a cop-
per line as an example.
7. Bleed the air from the water line by opening the water
supply temporarily.
Figure 14
WARNING!
To prevent the appliance from tipping
forward the compressor mounting plate
must have contact with the anti tipping
bracket (Figure 15).