Installation Instructions Ventilation grille for 84 inch cabinets CS CS CBS CBS 2062 2082 2062 2082 7083 541-01
Dimensions of the ventilation grille 1. Mount the angle brackets in the recess at left and right considering the measurement in Figure 1. Use the screws provided (screws 4 x 16 mm). 2. The supports of the ventilation grille can be adjusted horizontally if required by loosening the two screws on each support Figure 2. iMPORTANT The brackets must be mounted before the appliance is fitted into its recess.
. Attach the cover angle to the grille as shown in Figure 4. The holes of the angle must be in line with the center of the support - Figure 3. 4. Fasten the cover angle using five screws 2.9 x 9.5 provided Figure 4. Figure 3 The thread of the screws fits into the gap of the support. Figure 4 5. Attach the safety plates to the grille as shown in Figure 5 and fasten each using two screws 2.9 x 9.5 provided. Figure 5 6. Fit the appliance into the recess. 7. Click cover into place Figure 6.
For Service in the U.S. Liebherr Service Center Toll Free: 1-866-LIEBHER or 1-866-543-2437 Email: Service-appliances.us@liebherr.com PlusOne Solutions, Inc. 3501 Quadrangle Blvd, Suite 120 Orlando, FL 32817 For Service in Canada Liebherr Service Center Toll Free: 1-888-LIEBHER or 1-888-543-2437 www.euro-parts.ca EURO-PARTS CANADA 39822 Belgrave Road Belgrave, Ontario, N0G 1E0 Phone: (519) 357-3320 Fax: (519) 357-1326 www.liebherr-appliances.
