Assembly Instructions

Mounting the top anti-tipping
bracket
1. Mount the anti-tipping bracket provided on the wall
using 6 x 60 screws (Figure 9).
2. Clip both attachment brackets into
the transport grips of the appliance
(Figure 10).
Side view
Figure 9
Figure 10
7
B lockIng for S afety
Mounting the anti tipping device
in cabinets deeper than 24" -
Figure 8
To ensure the compressor mounting plate reaches
the anti tipping bracket at cabinets deeper than 24", a
wooden spacer must be mounted between the appli-
ance back and the wall. The anti tipping bracket will be
fastened to the floor downwards and to the spacer back-
wards.
Be sure the wooden spacer is fastened
securely to the floor.
Figure 8
Depth of spacer depending on
clearence between appliance and wall.