Design Guide

Built In Models 24" and 48"

Cabinet Opening Dimensions

All units are to open at a minimum of 90° to prevent problems removing drawers. With the door opening 90°, you may have to

move drawers slightly to clear the door interior.

•Use a minimum 2" (51 mm) ﬁller, for corner installations, so the door can be opened to 90°. If you’re using raised panels, consider

using a wider ﬁller.

•Use the supplied ﬁller strip when units are installed side by side.

NOTE:

Refer to the minimum door clearances and illustrations at the end of this section for details on door openings and ﬁller size alterna-

tives.

The given cabinet opening height dimension includes top air vent. If you choose to place the vent above the cabinet or in a sofﬁt,

you will need to adjust the height dimension accordingly.

SBS 241

SBS 243

SBS 246

BF, WF 1061

R, RB 1410

F 1051