Operating instructions Refrigerator Read the operating instructions before switching on for the first time Page 8 GB 7080 031-01 FKv
Disposal notes Range of appliance use The appliance contains reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. The appliance is suitable solely for cooling food in a domestic environment or similar.
Safety instructions and warnings • To prevent injury or damage to the unit, the appliance should be unpacked and set up by two people. • In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains. • To guarantee safe operation, ensure that the appliance is set up and connected as described in these operating instructions. • Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse.
Setting up • Do not place the appliance in direct sunlight or near cookers, radiators and similar sources of heat. • The floor on which the appliance stands should be horizontal and level. Compensate for uneven floors with the adjustable feet. • Do not cover ventilation openings or grille. Switching the appliance on and off You are recommended to clean the interior of the appliance before switching it on for the first time (see Cleaning).
Cooling The grid shelves can be moved to accommodate different height bottles or packages. The ventilation slots on the inside must not be covered! Defrosting GB The refrigerator compartment defrosts automatically. When operating at a very cold thermostat setting, the interior rear wall may ice up. In this case, the appliance must be defrosted manually. • Pull out the mains plug! • Remove the food from the appliance and store in a cool place.
Malfunctions You may be able to rectify the following faults by checking the possible causes yourself: Changing over door hinges Door hinges should only be changed by a trained expert. Changing the door hinges must be done by two people. • Appliance does not function: – Is the appliance switched on? – Is the plug correctly fitted in the mains socket? – Is the fuse intact? 1.
GB 6. Transfer lower hinge bracket and cover plate to the opposite side. 6. 11. 11. Place the door on the lower hinge bracket. 7. 7. Transfer lock and cover plates to the opposite side of the door. 12. 7. 12. Screw in the hinge pin. Align the door at the side and tighten the hinge pin. Replace cover plate. 8. Transfer handle and plugs to the opposite side of the door. 8. 13. Tighten the torque rod with the open-ended spanner provided. > 60° 13. 9. 10. 9.
