Design Guide

Fully Integrated
24" and 48" Models: HF 861 / HRB 1120, SBS 70I4
35
Kitchen cabinet setup for the water filter
The water filter module is supplied with the appliance (only
available for HF 861).
It should be installed near the appliance in the cabinet, for
example, in the adapter cabinet above the appliance. To con-
nect the filter to the appliance, it may be necessary to make an
opening (C) in the floor of the adapter cabinet through which
the hoses will be routed.
The maximum length of the water hose is 98-7/16 ‘‘ (2.5 m).
The filter cover must be installed during assembly to leave suf-
ficient space around the filter module.
Maintain the dimensions shown in Fig. so that the filter
can be replaced and the cover can be removed.
(A) 13/16in (20mm)
(B) 3-15/16in (100mm)
(C) 1-3/16in. x 3/8in. ( 30mm x10mm)
(D) min. 4in (100mm)