Design Guide

Fully Integrated

24" and 48" Models: HF 861 / HRB 1120, SBS 70I4

Designing the Kitchen Cabinet Door

You will need one door for the kitchen cabinet. In general, the

door has these characteristics:

• The width of the cabinet door depends on the kitchen style

and the size of the gaps between the door panels of the

cabinetry. Generally, a 1/8 in. (3 mm) vertical gap between

the door panels is recommended.

• The door should be at least 5/8 in. (16 mm) thick to allow the

connecting rails to be fastened to it. The maximum thickness

of the door panel can be 3/4 in. (19mm).

• With closed door, there should be a minimum of 1/8 in. (3

mm) between the refrigerator door and the cabinet door (2)

above it (if any).

• The top edge of the door (1) should be even with the doors of

adjoining cabinet(s), if any.

• Adjust the door alignment before installing the appliance. It is

impossible to adjust the door with the appliance installed.

• Check the installation dimensions according to Section "Unit

Dimensions".

• Do not load the door of the refrigerator with more than 49,6

lbs (22,5kg) of food.

• Before assembling the unit door, make sure that the permit-

ted weight for the unit door is not exceeded. If permitted

weight is exceeded damage to hinges may occur.

Kitchen Cabinet Doors

Maximum weight of unit door

Fridge door

Freezer door

50 lbs (23 kg)