Assembly and installation instructions
Table Of Contents
- enus
- 1 General safety information
- 2 Transporting the appliance
- 3 Setting up the device
- 4 Appliance dimensions
- 5 Recess dimensions
- 6 Cabinet door
- 7 Air circulation in the kitchen cabinet
- 8 Reversing the door
- 9 Water connection*
- 10 Installing the appliance in the recess.
- 11 Disposal of packaging
- 12 Connecting the appliance
Fig. 14
u
Swap the fixing bracket to the opposite side.
Fig. 15
u
Fitting the door again: Reattach the door to the hinges
and tighten the screws.
Fig. 16
*
u
Re-attaching the soft stop mechanism: Screw in the
ball studs (1), tighten the retainer (2) and attach the soft
stop dampers into the ball studs.*
Fig. 17
u
Check all screws and retighten if necessary.
u
Fit all covers except for the top left and the top right.
Only fit the top covers after installing the appliance into
the cabinet again.
Reversing the door
* Depending on model and options 11