Assembly and installation instructions
Table Of Contents
- enus
- 1 General safety information
- 2 Transporting the appliance
- 3 Setting up the device
- 4 Appliance dimensions
- 5 Recess dimensions
- 6 Cabinet door
- 7 Air circulation in the kitchen cabinet
- 8 Reversing the door
- 9 Water connection*
- 10 Installing the appliance in the recess.
- 11 Disposal of packaging
- 12 Connecting the appliance
Fig. 20
The following tool is supplied with the appliance:
Fig. 21
The following tool is also required:
Fig. 22
If the depth of the unit is
less than 21-3/4 in.
(553 mm) remove the
spacers on the back of the
appliance in order to be
able to push the appliance
completely into the recess.
Removing the spacers may
cause the appliance to use
more energy as this
reduces the ventilation
cross-section.
u
Undo the screw and remove the spacers.
Fig. 23
u
Remove the top left cover and screw the fixing bracket
in loosely.
Fig. 24
u
Take off cover.
Installing the appliance in the recess.
14 * Depending on model and options