Assembly and installation instructions
Table Of Contents
- enus
- 1 General safety information
- 2 Transporting the appliance
- 3 Setting up the device
- 4 Appliance dimensions
- 5 Recess dimensions
- 6 Cabinet door
- 7 Air circulation in the kitchen cabinet
- 8 Reversing the door
- 9 Water connection*
- 10 Installing the appliance in the recess.
- 11 Disposal of packaging
- 12 Connecting the appliance
Fig. 25
u
Assemble the mounting bracket. If the fridge section
door is large use two pairs of mounting brackets. After
assembly, fold the covers onto the bracket.
Fig. 26
Fig. 27
With 5/8 in. (16 mm) thick cabinet side panels:
u
clip spacers on all hinges.
u
Remove the top left cover and screw the fixing bracket
in loosely.
Fig. 28
The width of the equalizer trim is 22 1/2 in. (572 mm).
With a 22 in. (560 mm) wide recess:
u
cut the equalizer trim on both sides with a knife to fit the
groove.
With a recess width of between 22 in. (560 mm) and
22 1/2 in. (572 mm):
u
cut the equalizer trim on the hinge side with a knife to fit
the groove.
With a recess width of 22 1/2 in. (572 mm) to 22 3/4 in.
(578 mm):
u
Use the equalizer trim in its condition when delivered,
do not shorten it.
Installing the appliance in the recess.
* Depending on model and options 15