Assembly and installation instructions
Table Of Contents
- enus
- 1 General safety information
- 2 Transporting the appliance
- 3 Setting up the device
- 4 Appliance dimensions
- 5 Recess dimensions
- 6 Cabinet door
- 7 Air circulation in the kitchen cabinet
- 8 Reversing the door
- 9 Water connection*
- 10 Installing the appliance in the recess.
- 11 Disposal of packaging
- 12 Connecting the appliance
Fig. 47
u
Open the cover again to assemble the mounting
bracket on the unit door. Align the front edge of the
mounting bracket parallel to the unit door edge and
screw the bracket down tightly.
Fig. 48
u
Aligning the unit door in the Z direction: Undo the
adjusting screw on the crosspiece and the screw on the
mounting bracket then move the door.
Fig. 49
u
Check the distance between the unit door and the unit
body.
u
Check all screws and retighten if necessary.
Fig. 50
u
Clip the top cover on.
Fig. 51
u
Fold the cover of the mounting bracket onto the
bracket.
Installing the appliance in the recess.
* Depending on model and options 21