Installation Instructions

2. Open the refrigerator door and hang the panel on the
top adjusting bolts (Figure 36).
3. Screw on the hex nuts to the adjusting bolts and fin-
ger tighten temporarily (Figure 36).
Figure 35
Figure 37
4. Close the door and check the height of the panel.
5. Align the panel in its vertical position if necessary.
Loosen the hex nuts and turn the adusting bolts
(Figure 37).
Mounting the Refrigerator Door Panel
Figure 36
1. Turn in the adjusting bolts on the bottom of the refrig-
erator door as far as possible (Figure 35).
Figure 38
6. Align the panel horizontally (with the long holes in
the attachment bracket) (Figure 38).
7. Tighten the hex nuts.
17
I nStallatIon