Manualshelf

Spec Sheet

ManualsBrandsLiebherr ManualsBottom Mount Refrigerators30 Inch Built-in Panel Ready Refrigerator with 2 Bottom Freezer Drawers, 2 Adjustable GlassLine Shelves, Wine Rack, Adjustable Door Bins, 2 Produce Drawers, Ice Maker, LED Lighting and ENERGY STAR Rated: Left Hinge
12
Unit Dimensions
Panel Dimensions
Cabinet Opening Dimensions
Adjusting range of ventilation grille
1-5/8" min. > 3" max.
The height of this panel can be reduced by up to 2" to accommodate higher toe kicks
Minimum panel thickness is 5/8" (16 mm).
Maximum panel thickness is 1-1/2" (38 mm).
Maximum weight of the refrigerator panel is
60 lbs (27 kg).
Maximum weight of each freezer panel is
26.5 lbs (12 kg).
Minimum panel thickness is 5/8" (16 mm).
Maximum panel thickness is 1-1/2" (38 mm).
Maximum weight of the refrigerator panel is
60 lbs (27 kg).
Maximum weight of each freezer panel is
26.5 lbs (12 kg).
Cabinet opening A Cabinet opening B
80" 45-1/4" (1150 mm)
84" 49-1/4" (1251 mm)"
Cabinet opening C Cabinet opening D
80" 45-3/4" (1162 mm)
84" 49-3/4" (1264 mm)"
30" Single
60" Side by Side
Water supply line
IMPORTANT
Factory available stainless steel panels are designed
for an inset installation only and require a
cabinet / gable depth of 24 - 3/4".
Inset cabinet Depth D Inset cabinet Depth D
24" + panel thickness 24"
Hinge
Door
Height can be increased by 1-1/2“
(40 mm) by turning the levelling
feet at the front and the height
adjustable roller units at the
appliance rear.
Allow door swing clearance at locations
next to a wall.
The refrigerator door must open to a minimum
of 90° to allow the crispers to open and the
shelves to be removed.
30"
Diagrams
Liebherr HC 1550
Fully Integrated/Seamless

Summary of content (2 pages)