Installation Instructions

Fastening the Appliance in the
Recess - Figure 20
Fasten the appliance in the recess through the pre-
mounted supports at left and right on the appliance
housing using screws 4 x 16 mm. Then click the covers
supplied into place.
Leveling the Appliance - Figure 19
1. Adjust the height of the
appliance at the front
by twisting the leveling
feet
1
(A/F 27).
Use the open-ended
spanner provided.
2. Adjust the height of the
appliance at the rear
by turning the adjusting
bolts
2
.
3. Rotate leveling feet
1
until firmly in place
against the floor.
To prevent the appliance from tipping
forward the leveling feet 1 (Figure 19)
must have contact with the floor.
Figure 20
Figure 19
Adjusting the refrigerator door -
Figure 21
The lateral tilt of the refrigerator door can be adjusted
if required. Undo screws
1
. Adjust the lateral tilt using
the grub screw
2
(Allen key A/F 2.5).
Figure 21
12
InStallatIon