Installation Instructions

2. Open the refrigerator door and hang the panel on the
top adjusting bolts (Figure 27).
3. Screw on the hex nuts to the adjusting bolts and fin-
ger tighten temporarily (Figure 27).
Figure 26
Figure 28
4. Close the door and check the height of the panel.
5. Align the panel in its vertical position if necessary.
Loosen the hex nuts and turn the adusting bolts
(Figure 28).
Mounting the Refrigerator Door Panel
Figure 27
1. Turn in the adjusting bolts on the bottom of the refrig-
erator door as far as possible (Figure 26).
Figure 29
6. Align the panel horizontally (with the long holes in the
attachment bracket) (Figure 29).
7. Tighten the hex nuts.
15
InStallatIon