Installation Instructions

Before Mounting the Door Panels

- Figure 23

Remove cover

and unscrew the upper and lower

attachment bracket

of the refrigerator door. These

brackets will be mounted onto the refrigerator door

panel.

IMPORTANT

The nuts are needed to fit the premounted

panel onto the refrigerator door.

Figure 23

Figure 24

Unscrew the attachment brackets of both freezer draw-

ers. These brackets will be mounted onto the freezer

drawer panels (

Figure 24).

IMPORTANT

The screws are needed to fit the

premounted panels onto the freezer

drawers.

Adjusting the front of the draw-

- Figure 22

If required, the front of the freezer drawers can be

adjusted.

Transfer the screws shown in the illustration (on the left

and right sides of the freezer drawer) individually to the

long slots below.

Tighten the screws in the front of the drawer once it is in

the right position.

Side view of the freezer drawer

pulled out

Figure 22

InStallatIon