Installation Sheet

Figure 33
8. Turn the adjusting bolts (bottom refrigerator door)
until they make contact with the attachment bracket
(Figure 30).
Figure 30
Figure 31
9. Screw on the hex nuts and tighten (Figure 31).
10. Loosen the three screws on the top of the attach-
ment bracket, align the panel as shown in Figure 32
and tighten the screws. This can also be done with
the lower attachment bracket.
Figure 32
11. Click cover 1 into place.
Insert the cover strip provided
2 between refrigera-
tor door and panel (Figure 33).
16
InStallatIon