Design Guide Fully Integrated 30" and 36" Release 08 2015
Welcome Liebherr's engineering excellence in Germany provides the largest selection of freezers, refrigerators and wine refrigerators worldwide. Liebherr is one of the World’s leading Manufacturers of Premium Refrigeration. For more than 60 years, Liebherr has specialized in developing and manufacturing first class refrigerators and freezers as well as wine cabinets. We focus on performance and efficiency as well as keeping food fresher longer.
Introduction LIEBHERR WARRANTY PLAN FULL TWO YEAR WARRANTY For two years from the date of original purchase, your Liebherr warranty covers all parts and labor to repair or replace any part of the product which proves to be defective in materials or workmanship. FULL FIVE YEAR WARRANTY For five years from the date of original purchase, your Liebherr warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system.
Contents Safety Warnings.............................................................................................................................................................................. 7 Electrical Requirements & Safety........................................................................................................................................... 8 IceMaker (if equipped)...................................................................................................................
General Remarks Safety Warnings PLEASE READ AND FOLLOW THESE INSTRUCTIONS This design guide contains Warning and Important statements. This information is important for planning a safe and efficient installation. Please refer to the Installation Manual specific to your model for complete installation instructions. This design guide is intended for planning purposes and is not a replacement for your appliance's Use and Care Manual which contains important information on how to use Liebherr appliances.
General Remarks Electrical Requirements & Safety IceMaker (if equipped) A 15 amp or 20 amp, 110-120 VAC, circuit which is grounded and protected by a circuit breaker or fuse is required. The icemaker is located in the freezer compartment. It must be connected to the water supply. The appliance must be level for the icemaker to function properly. We recommend using a dedicated circuit for each appliance to prevent circuit overload and the chance of interruption to the appliance.
General Remarks Area Requirements Safety Regulations Verify the following: The appliances and are designed to cool, freeze, store food as well and make ice (if equipped). • Floors can support refrigerator’s weight plus approximately 1200 pounds (544 kg) of food weight. Not all Liebherr products are designed for 1200 pounds (544 kg) of food. Some units are smaller and total weights may vary. • Finished kitchen floor height is level.
Fully Integrated Specifications 30" Models HC 1540 (right hinged) HC 1541 (left hinged) Energy Star: certified Energy consumption p. a.: 507 kWh Energy Supply: 115V / 60Hz / 2.5A Total capacity: 14.1 cu ft (400 L) Refrigerator: 9.8 cu ft (278 L) Freezer: 4.3 cu ft (122 L) Ice cube output: 2.2 lbs/24h Ice cube stock: 6 lbs IceMaker water tank capacity: 73.2 cu in (1.
Fully Integrated HCB 1560 (right hinged) HCB 1561 (left hinged) Energy Star: certified Energy consumption p. a.: 507 kWh Energy Supply: 115V / 60Hz / 2.5A Total capacity: 14.1 cu ft (400 L) Refrigerator: 9.8 cu ft (278 L) Freezer: 4.3 cu ft (122 L) Ice cube output: 2.
Fully Integrated Specifications 36" Models HC 2060 (right hinged) HC 2061 (left hinged) Energy Star: certified Energy consumption p. a.: 561 kWh Energy Supply: 115V / 60Hz / 2.5A Total capacity: 19.5 cu ft (552 L) Refrigerator: 13.
Fully Integrated HC 2062 Energy Star: certified Energy consumption p. a.: 561 kWh Energy Supply: 115V / 60Hz / 2.5A Total capacity: 19.5 cu ft (552 L) Refrigerator: 13.
Fully Integrated Unit Dimensions HC 1540, HC 1541, HC 1550, HC 1551, HCB 1560, HCB 1561 Door Hinge Height can be increased by 1-1/2" (40 mm) by turning the levelling feet at the front and the height adjustable roller units at the appliance rear. Allow door swing clearance at locations next to a wall. The refrigerator door must open to a minimum of 90° to allow the crispers to open and the shelves to be removed. 14 Adjusting range of ventilation grille 1-5/8" min. > 3" max.
Fully Integrated Unit Dimensions HC 2060, HC 2061, HCB 2060, HCB 2061 Door Hinge Height can be increased by 1-1/2" (40 mm) by turning the levelling feet at the front and the height adjustable roller units at the appliance rear. Allow door swing clearance at locations next to a wall. The refrigerator door must open to a minimum of 90° to allow the crispers to open and the shelves to be removed.
Fully Integrated Unit Dimensions HC 2062, HCB 2062 Center rail Door Hinge Height can be increased by 1-1/2" (40 mm) by turning the levelling feet at the front and the height adjustable roller units at the appliance rear. Allow door swing clearance at locations next to a wall. The refrigerator door must open to a minimum of 90° to allow the crispers to open and the shelves to be removed.
Fully Integrated Ventilation Requirements HC and HCB appliances do not require ventilation considerations in the cabinetry. The required airflow is directed through the toe kick base. It is important to use the provided cover grille for the ventilation opening. This opening must not be covered. R600a Refrigerant WARNING! The refrigerant R600a contained within the appliances is environmentally friendly, but flammable. Leaking refrigerant can ignite.
Fully Integrated Cabinet Opening Dimensions HC 1540, HC 1541, HCB 1560, HCB 1561 Inset cabinet Depth D Frameless cabinet Depth D 24" + panel thickness 24" IMPORTANT Factory available stainless steel panels are designed for an inset installation only and require a cabinet / gable depth of 24 - 3/4". Concerning the refrigerator compartment there is the option to choose between stainless steel panels for a 80” or a 84” installation situation.
Fully Integrated Cabinet Configuration HC 1540, HC 1541, HCB 1560, HCB 1561 The power cord exits the rear of the appliance at this location. IMPORTANT These areas are visible when the appliance door is opened. Designed finish is required. Free length of the power cord is 90". The electrical outlet must not be situated behind the appliance and must be easily accessible.
Fully Integrated Cabinet Opening Dimensions HC/HCB 2060, HC/HCB 2061, HC 2062, HCB 2062 Inset cabinet Depth D Frameless cabinet Depth D 24" + panel thickness 24" IMPORTANT Factory available stainless steel panels are designed for an inset installation only and require a cabinet / gable depth of 24 - 3/4". Concerning the refrigerator compartment there is the option to choose between stainless steel panels for a 80” or a 84” installation situation.
Fully Integrated Cabinet Configuration HC/HCB 2060, HC/HCB 2061, HC 2062, HCB 2062 IMPORTANT These areas are visible when the appliance door is opened. Designed finish is required. The power cord exits the rear of the appliance at this location. Free length of the power cord is 90". The electrical outlet must not be situated behind the appliance and must be easily accessible.
Fully Integrated Installation Styles Inset Installation Style Appliance and panels sit fully within the opening and are flush with what could be its own box, between two pantry cabinets or decorative columns, etc. This is the most common installation scenario. Frameless Installation Style With this installation style, these wider appliance panels partially overlay the shared side gables of adjacent cabinetry so as to mimic the look of a frameless style cabinet.
Fully Integrated Panel Dimensions Inset Installation Style HC 1540, HC 1541 HCB 1560, HCB 1561 Panel Dimensions Frameless Installation Style HC 1540, HC 1541 HCB 1560, HCB 1561 Minimum panel thickness is 5/8" (16 mm). Minimum panel thickness is 5/8" (16 mm). Maximum panel thickness is 1-1/2" (38 mm). Maximum panel thickness is 1-1/2" (38 mm). Maximum weight of the refrigerator panel is 60 lbs (27 kg). Maximum weight of the refrigerator panel is 60 lbs (27 kg).
Fully Integrated Panel Dimensions Inset Installation Style HC 2060, HC 2061 HCB 2060, HCB 2061 Panel Dimensions Frameless Installation Style HC 2060, HC 2061 HCB 2060, HCB 2061 Minimum panel thickness 5/8" (16 mm). Minimum panel thickness 5/8" (16 mm). Maximum panel thickness is 1-1/2" (38 mm). Maximum panel thickness is 1-1/2" (38 mm). Maximum weight of the refrigerator panel is 60 lbs (27 kg). Maximum weight of the refrigerator panel is 60 lbs (27 kg). Maximum weight of each freezer panel is 26.
Fully Integrated Panel Dimensions Inset Installation Style Panel Dimensions Frameless Installation Style Minimum panel thickness is 5/8" (16 mm). Minimum panel thickness is 5/8" (16 mm). Maximum panel thickness is 3/4" (19 mm). Maximum panel thickness is 3/4" (19 mm). Maximum weight for each panel is 26.5 lbs (12 kg). Maximum weight for each panel is 26.5 lbs (12 kg).
Fully Integrated Door Swing Clearance - Inset installation style HC 1540, HC1541 HCB 1560, HCB 1561 HC 2060, HC 2061 HCB 2060, HCB 2061 Right side wall of appliance housing Front of appliance housing Top View Front panel - door closed Panel thickness g nin ope oor l-d ane nt p Fro le = ang ° 115 Panel thickness 26
Fully Integrated Door Swing Clearance - Frameless installation style HC 1540, HC1541 HCB 1560, HCB 1561 HC 2060, HC 2061 IMPORTANT HCB 2060, HCB 2061 The gap between panels at frameless installation style must be at least 1/4" (6 mm).
Fully Integrated Door Swing Clearance - Inset installation style - HC 2062 / HCB 2062 Front panel 5/8" Right side wall of appliance housing Front of appliance housing 3/4" cabinet frame 5/8" Front panel - door closed 105° ngle = ning a r ope - doo panel Front 5/8" 28
Fully Integrated Door Swing Clearance - Inset installation style - HC 2062 / HCB 2062 Front panel 3/4" Right side wall of appliance housing Front of appliance housing 3/4" cabinet frame 3/4" Front panel - door closed 105° ngle = ning a r ope - doo panel Front 3/4" IMPORTANT The use of 3/4" panels at inset installation style requires 95° hinge limitation. Door stop pins are included with the appliance. 3/4" panels will interfere with the adjacent gable at 105° opening angle.
Fully Integrated Door Swing Clearance - Frameless installation style - HC 2062 / HCB 2062 Front panel 5/8" Right side wall of appliance housing Front of appliance housing 3/4" cabinet frame 5/8" Front panel - door closed 105° ngle = ning a r ope - doo panel Front 5/8" IMPORTANT The use of 5/8" panels, with a reveal of less than 1/4" to the adjacent cabinet panel requires 95° hinge limitation. Door stop pins are included with the appliance.
Fully Integrated Door Swing Clearance - Frameless installation style - HC 2062 / HCB 2062 Front panel 3/4" Right side wall of appliance housing Front of appliance housing 3/4" cabinet frame 3/4" Front panel - door closed 105° ngle = ning a r ope - doo panel Front 3/4" 3/4" cabinet door beside the appliance IMPORTANT The use of 3/4" panels, with a reveal of less than 3/8" to the adjacent cabinet panel requires 95° hinge limitation. Door stop pins are included with the appliance.
Fully Integrated Accessories Image Article number Name of the item For use with model 9900 287-00 Stainless steel panel refrigerator door 80" recess height. (Inset installation style) Height: 45 - 1/4" Width: 29 - 3/4" Thickness: 3/4" HC 1540 HC 1541 9900 285-00 9900 283-00 Stainless steel panel refrigerator door 84" recess height.
Fully Integrated Image Article number Name of the item For use with model 9900 337-00 Stainless steel panels refrigerator doors 80" recess height. (Inset installation style) Height: 45 - 1/4" Width: 17 - 3/4" Thickness: 3/4" HC 2062 HCB 2062 9900 335-00 Stainless steel panels refrigerator doors 84" recess height. (Inset installation style) Height: 49 - 1/4" Width: 17 - 3/4" Thickness: 3/4" HC 2062 HCB 2062 9900 333-00 Stainless steel panel refrigerator door 80" recess height.
Fully Integrated Image Article number Name of the item For use with model 9900 339-00 Handles stainless steel (4 pcs) HC 2062 HCB 2062 9900 513-00 Handles aluminium (4 pcs) HC 2062 HCB 2062 9900 327-00 Handles stainless steel (3 pcs) HC 2060 HC 2061 HCB 2060 HCB 2061 9900 329-00 Handles aluminium (3 pcs) HC 2060 HC 2061 HCB 2060 HCB 2061 34
Fully Integrated Image Article number Name of the item For use with model 9900 219-00 Side by Side Kit Includes anti-sweat panel, connecting parts, covers and assembly instruction. HC 1540 HC 1541 Side by Side Kit Includes anti-sweat panel, connecting parts, covers and assembly instruction.
Fully Integrated Image Article number Name of the item For use with model 9096 214-00 Door stop pins 95° Frenchdoor. HC 2062 HCB 2062 One set is included with the appliance. Includes 4 pins and assembly instruction.
Fully Integrated 37