Specifications Sheet

Unit Dimensions
Ventilation Requirements
Cabinet Opening Dimensions
The appliance do not require ventilation considerations
in the cabinetry. The required airfl ow is directed
through the toe kick base. It is important to use the
provided cover grille for the ventilation opening.
This opening must not be covered.
Allow door swing clearance at locations next to a wall.
The refrigerator door must open to a minimum of 90° to
allow the crispers to open and the shelves to be removed.
Height can be increased by 1-1/2“ (40 mm) by turning the
levelling feet at the front and the height adjustable roller
units at the appliance rear.
Factory available stainless steel panels are designed for an inset
installation only and require a cabinet / gable depth of 24 - 3/4".
Inset cabinet Depth D
Frameless cabinet Depth D
24" + panel thickness 24"
Panel Dimensions
Cabinet opening A
Refrigerator door panel B
80" 45-1/4" (1150 mm)
84" 49-1/4" (1251 mm)
Cabinet opening A
Refrigerator door panel B
80" 45-3/4" (1162 mm)
84" 49-3/4" (1264 mm)
Minimum panel thickness is 5/8“ (16 mm).
Maximum panel thickness is 3/4“ (19 mm).
Maximum weight of each panel is
26.5 lbs (12 kg).
Minimum panel thickness is 5/8“ (16 mm).
Maximum panel thickness is 3/4“ (19 mm).
Maximum weight of each panel is
26.5 lbs (12 kg).
Inset Installation Style Frameless Installation Style
Hinge
Door
Center rail
Water line outlet
Water supply line
36" Single
72" Side by Side
The height of this panel cannot be reduced for taller toe kicks as it will reveal structural elements of the
appliance. Instead, install appliance on a platform and adjust the opening height to accommodate.
36"
Diagrams
Liebherr HCB 2062
Fully Integrated/Seamless