Installation Guide
Table Of Contents
- enus
- 1 General safety information
- 2 Transporting the appliance
- 3 Setting up the device
- 4 Appliance dimensions
- 5 Recess dimensions
- 6 Cabinet door
- 7 Kitchen cabinet setup for the water filter*
- 8 Air circulation in the kitchen cabinet
- 9 Reversing the door
- 10 Water connection*
- 11 Installing the appliance in the recess.
- 12 Installing the water filter*
- 13 Disposal of packaging
- 14 Connecting the appliance
Fig. 34
u
Push the appliance in until the handle side above the
bracket and below the stop meets the front of the
cabinet side panel. With 5/8 in. (16 mm)thick cabinet
side panels the spacers on the hinge side must abut at
the same time. With 5/8 in. (16 mm) thick cabinet side
panels align the front edges of the hinges so that they
are flush with the front of the cabinet side panel.
Fig. 35
u
If necessary align the appliance using the adjusting
feet.
Fig. 36
u
Checking the insertion depth (A): The distance
between the front edge of the cabinet and the appli-
ance body must be 1-5/8 '' (42 mm) all the way along. If
necessary make allowance for the stops on the cabinet
(d).
Installing the appliance in the recess.
16 * Depending on model and options