Installation Guide
Table Of Contents
- enus
- 1 General safety information
- 2 Transporting the appliance
- 3 Setting up the device
- 4 Appliance dimensions
- 5 Recess dimensions
- 6 Cabinet door
- 7 Kitchen cabinet setup for the water filter*
- 8 Air circulation in the kitchen cabinet
- 9 Reversing the door
- 10 Water connection*
- 11 Installing the appliance in the recess.
- 12 Installing the water filter*
- 13 Disposal of packaging
- 14 Connecting the appliance
Fig. 40
u
Close the door.
u
Check the default setting of 5/16 in. (8 mm).
u
Raise fitting aids to unit door height. Bottom stop edge
of the fitting aid = top edge of the door to be fitted.
Fig. 41
u
Undo the counter nuts and remove the crosspiece.
Fig. 42
u
Hang crosspiece on the inside of the unit door.
With a 22 in. (560 mm) wide recess:
u
align the crosspiece to the middle of the door.
Fig. 43
With a 22 3/4 in. (578 mm) wide recess:
u
align the crosspiece to the middle of the door and then
3/16 (5.5 mm) move towards the hinge side.
u
With chipboard doors fit the crosspiece with at least 6
screws and at least 4 screws for frame and panel
doors.
Fig. 44
u
Remove the fitting aids, turn round and insert into the
adjacent opening.
Fig. 45
u
Clip the cover on the crosspiece on the handle side.
Installing the appliance in the recess.
18 * Depending on model and options