Installation Instructions

Fig. 46
u
Attach the unit door and loosely screw the lock nuts
onto the adjusting bolts.
Fig. 47
u
Align the unit door in the X and Y direction using the
adjusting bolts.
u
Tighten the lock nuts.
Fig. 48
u
Check the gap between the door and the surrounding
unit doors
Fig. 49
u
Align the front edge of the spring steel bracket parallel
to the unit door edge and screw the bracket down
tightly.
Fig. 50
u
Aligning the unit door in the Z direction: Undo the
adjusting screw on the crosspiece and the screw on the
spring steel bracket then move the door.
Installing the appliance in the recess.
* Depending on model and options 19