Installation Instructions

Fig. 51
u
Check the distance between the unit door and the unit
body.
u
Check all screws and retighten if necessary.
Fig. 52
u
Clip the top cover on.
Fig. 53
u
Put the cover onto the spring steel bracket, fasten at the
front, swivel towards the back and let it engage at the
top and bottom.
Fig. 54
Check the following points to make sure the appliance is
installed correctly. Otherwise, icing up, the formation of
condensate and malfunctions may occur:
w
The door must close properly.
w
The unit door must not touch the body of the unit.
w
The seal on the upper corner on the handle side must
be fitted securely. To verify this, darken the room, place
a flashlight in top part of the appliance and close the
door. If you see light shining out, check the assembly.
12 Installing the water filter*
The water filter guarantees optimal water quality and
should be installed the first time you use the appliance.
Alternatively, the appliance can also be operated without
the water filter.
Flow rate 0.5 gpm (1.89 lpm)
Water connection Drinking water
Water pressure 40 psi - 90 psi ( 0.28 MPa - 0.62 MPa
(2.8 bar - 6.2 bar) )
Water temperature 33 °F - 100 °F ( 0.6 °C - 37 °C )
Capacity 300 gal. (1135 l)
WARNING
Consuming contaminants can be harmful to your health!
u
If there is a chance the water may contain harmful
bacteria or if the water quality is unknown, do not use
this system without appropriate disinfection measures
upstream or downstream of the system.
Installing the water filter
20 * Depending on model and options